LED Indicators¶
FlexKVM has three indicator LEDs showing power, connection, and network status. The đĸ Status LED and đ´ Warning LED can be turned off in settings (to reduce light pollution).
đ´ Power LED â Power Status¶
| State | Meaning |
|---|---|
| Solid on | Powered |
| Off | Not powered |
đĸ Status LED â Connection Status¶
Reflects HDMI and USB connection state:
| State | Frequency | Meaning |
|---|---|---|
| Solid on | â | Normal, HDMI locked |
| Slow blink | 1 Hz | HDMI signal lost |
| Fast blink | 4 Hz | USB not connected |
| Off | â | System not started |
Priority: fast blink > slow blink > solid on. When both USB and HDMI are disconnected, the LED shows fast blink.
đ´ Warning LED â Network & System Status¶
| State | Frequency | Meaning |
|---|---|---|
| Off | â | Network connected, normal |
| Slow blink | 1 Hz | Network disconnected, or in hotspot provisioning mode |
| Fast blink | 4 Hz | OTA upgrade in progress â do not power off |
| Solid on | â | Critical system error â reboot or contact support |
Combined States¶
| Pattern | Meaning |
|---|---|
| đĸ Status LED + đ´ Warning LED both fast-blinking | Factory reset in progress |
Turn Off LEDs¶
Go to Settings â System â LED Settings.
Turning this setting off turns off all LEDs â useful for nighttime use or reducing light pollution. Does not affect device operation.